| LE / E9 |
Motor Locked / Overload |
Too much laundry or items stuck in the motor. Reduce load size. Check for small items (coins, socks) in the pump filter. |
| OE / OF |
Water Overflow / Drainage Issue |
Blocked drain hose or pump failure. Check hose for kinks, clean pump filter. Ensure proper drain height. |
| IE / 1E |
Water Inlet Error |
No water supply or low water pressure. Check water taps are fully open and hoses aren't kinked. Clean inlet filters. |
| UE / UB |
Unbalanced Load |
Laundry is unevenly distributed causing excessive vibration. Redistribute clothes in the drum. Check leveling of the washer. |
| DE / D0 |
Door Open / Latch Error |
The washer door is not properly closed or latched. Ensure door is firmly shut. Check for obstructions or damaged latch. |
| tE / TE1 |
Temperature Sensor Error |
Faulty thermistor or water heater. Unplug the washer for 5 minutes. If code returns, sensor or heater may need replacement. |
| SE / 5E |
Drain Pump Issue |
The washer cannot drain water. Check drain pump filter for debris and ensure the drain hose is clear. |
| CL / FL |
Child Lock / Foam Level |
CL: Child lock is active, press and hold the lock button. FL: Too much foam detected, reduce detergent. |
| E4 / E8 |
Electronic Control Board Error |
General issue with the main control board. Try a power reset. If persistent, the PCB may need professional inspection or replacement. |
| FE / FE1 |
Overfilling / Water Level Sensor |
The washer is overfilling with water. A faulty water level sensor or inlet valve may be the cause. Shut off water supply. |
